Finish
Devgrip 238
Devgrip 238 is a two component, abrasion resistant epoxy coating. *Please note this product is only available in North America.
BACK TO PRODUCTS
Infrastructure
Solutions for Structural Integrity and Design Excellence
- Ensure safety and durability.
- Enhance impact resistance.
- Maintain design aesthetics for years to come.
Filter by
Products
My Filters
Other
Acrylic Maintenance
Ideal for protecting and decorating concrete and metal surfaces such as floors, horizontal markings, sports courts, shelves, handrails, transformers, ferrous and non-ferrous metal surfaces in moderately aggressive industrial environments that are not exposed to contact with organic solvents.
Finish
Devthane 379N
A low VOC, two component modified acrylic polyurethane finish giving excellent durability and long-term
recoatability, for use over correctly prepared primed surfaces. This product is also HAPS free and
exempt solvent free.
recoatability, for use over correctly prepared primed surfaces. This product is also HAPS free and
exempt solvent free.
Finish
Devcryl 1449
A single component water borne finish formulated on weather resistant acrylic copolymer technology. *Please note this product is only available in North America.
Lining
Devmat 100
Devmat 100 is a thick-film, 100% solids reinforced, proprietary formulated epoxy-based internal lining. *Please note this product is only available in North America.
Passive Fire Protection
Chartek 1960 CSP
Chartek 1960CSP intumescent material combined hydrocarbon fire protection and insulation against cryogenic liquid exposure.
Lining
Devran 133
A 100% solids, two-component epoxy coating for tank lining and repair of pitted steel surfaces. *Please note this product is only available in North America.
Lining
Bar-Rust 233H LV
A low VOC, high performance, multi-purpose, surface tolerant, two-component chemically-cured epoxy semi-gloss coating.
Primer
Intershield 300V
A light coloured, abrasion resistant, aluminium pure epoxy coating giving excellent long term anticorrosive protection and low temperature application capability.
Temporary Protection
RELEST Wind LEP ETU Cartridge - I374-8735
RELEST Wind LEP ETU Cartridge I374-8735 Easy To Use is a two-component solvent-free polyurethane coating for the M&R market which is especially designed for protecting the leading edge of rotor blades of wind energy plants from erosion damage caused by rain, sand, hail, dirt and other particles suspended in the air. The coating consists of an exceptionally fast, hard wearing, UV- and abrasion resistant polyurethane elastomer. It is supplied in a convenient 2-component cartridge for direct application of minimal quantities without weighing.
Primer-Finish
Intergard 452
Intergard 452 is a two component, high build epoxy intermediate. Pigmented with micaceous iron oxide to comply with the requirements of BS5493:1977
Chemical Resistant Lining
Devchem 256
A chemical resistant tank lining and protective coating for highly corrosive environments.
Other
RELEST Wind Gelcoat - I372-7235
RELEST Wind Gelcoat ca. RAL 7035, RA is a solvent free 2k viscoplastic, polyaspartic coating with excellent abrasion resistance. Suitable as part of a coating system for UV- and weather- resistance. Film thicknesses of approximately 200μm can be achieved in one step with optimal flow properties. RELEST Wind Gelcoat ca. RAL 7035, RA is characterised by its great adhesion to epoxy laminate.
Filler
Devfil 145
A two-component epoxy filler and surfacer for interior and exterior concrete and masonry. *Please note this product is only available in North America.
Surface Tolerant
RELEST Wind Putty Porefiller - I372-5915
RELEST Wind Putty Porefiller is a 2K polyurethane for filling medium pinholes. UV- and weather- resistant with very fast drying properties and long workable life. It is compatible with all RELEST coating systems and can be recoated without sanding.