BACK TO PRODUCTS

Wind Power

Comprehensive Coating Solutions for Renewable Energy
  • Protect wind turbines from harsh environments.
  • Extend component lifespan from tip to toe.
  • Ensure compliance with industry standards.
     

EXPLORE CASE STUDIES

CASES

Protecting the World's Largest Offshore Wind Farm

Filter by

Products

187 Product Found
My Filters
    Chemical Resistant Lining
    Ceilcote 242 Flakeline
    Ceilcote 242 Flakeline is a flake filled vinyl ester coating with excellent resistance to organic and inorganic acid solutions and many aliphatic solvents.It offers outstanding chemical resistance with quick turn around for service. Uses Ceilcote #2 Hardener.
    Finish
    Interfine 3399
    A high performance, two component, fluorocarbon finish which affords extended lifetime to first maintenance when utilised as part of a high performance anti-corrosive system. Interfine 3399 offers superior gloss and colour retention and provides significantly improved resistance to yellowing and chalking when compared to typical conventional topcoats including catalysed acrylic, and polyurethane finishes.
    Chemical Resistant Lining
    Ceilcote 242AR Flakeline
    Ceilcote 242AR Flakeline is a flake-filled, corrosion and abrasion resistant lining system. Uses Ceilcote #2 Hardener.
    Lining
    Enviroline 125
    An ultra high solids, two component lining system utilising advanced epoxy technology.
    Surface Pre-Treatment
    Interplus 4103
    A single component, water-based rust remover / cleaner concentrated fluid. Clean Cons is free from toxins and conforms to the yellow classification of the Harmonised Offshore Chemical Notification Format (HOCNF).
    Primer
    Intercure 200HS
    Intercure 200HS is a fast drying two component, high solids, low VOC, zinc phosphate epoxy primer/intermediate offering excellent barrier protection, low temperature cure and rapid overcoating properties. Complete with MIO, Intercure 200HS can speed up production and throughput in fabrication shops.
    Temperature Resistance
    Intertherm 751CSA
    An innovative, high build, ‘cold spray’ applied coating, Intertherm 751CSA is based on titanium modified inorganic copolymer technology. Capable of providing corrosion protection, Intertherm 751CSA is a high performance coating applied using standard application equipment curing effectively at ambient temperatures. Suitable for steel operating at temperatures between -196°C (-321°F) and 650ºC (1202ºF), Intertherm 751CSA does not require additional heat curing prior to being placed in service.
    Finish
    Intercryl 700
    A single component water borne finish formulated on weather resistant acrylic copolymer technology.
    Subsea, Abrasion Resistant and Splashzone
    Interzone 1000
    With proven track record spanning over 30 years, low VOC Interzone 1000 is a high build, two component epoxy coating pigmented with lamellar glass flake. Interzone 1000 extends asset lifetime by providing outstanding abrasion and corrosion resistance to steelwork located in the harshest offshore environments. Interzone 1000 can also be used in deck coating systems with appropriate aggregate.
    Primer
    Interzinc 2265
    Part of the Interzinc 22 series of products.A two component, rapid recoat, fast curing solvent based inorganic zinc rich ethyl silicate primer. Conforms to SSPC Paint 20 Level 3.Available in ASTM D520, Type II zinc dust version as standard
    Primer-Finish
    Interthane 3230HG
    A two component, high gloss, low VOC, high solids, fast curing, polyurethane primer/finish pigmented with zinc phosphate to provide added anti-corrosive performance and a durable, decorative finish.
    Finish
    Interdur 8860
    A two component acrylic polyurethane finish giving excellent durability and long term recoatability.
    Structural Concrete- Repair and Protection
    Intercrete 4808 (formerly Unimatch)
    A single component, water-based (VOC free), cosmetic grade, polymer modified cementitious mortar suitable for the repair of damaged, honeycombed or spalled concrete. Intercrete 4808 is highly waterproof and exhibits good build characteristics which can be used in vertical, overhead and other difficult areas of repair without the need for primers or supports. Colour and texture matching is easily achieved by mixing Grey and White grades at different ratios using trial mixes. Coloured aggregates and concrete pigments can also be blended in.
    Subsea, Abrasion Resistant and Splashzone
    Interzone 954GF
    A high solids, low VOC epoxy barrier coat, reinforced with chemically resistant high aspect ratio lamellar glass flake for enhanced durability, abrasion and corrosion protection with excellent cathodic disbondment performance.
    Passive Fire Protection
    Interchar 1260
    Interchar 1260 is a class leading single component, zero VOC thin film waterborne intumescent coating designed for onsite application. It provides up to 90 minutes fire resistance to interior structural steelwork whilst maintaining desirable aesthetics. Its quick drying formulation allows for fast project completion with 60 minute fire protection provided via single coat application
    1. 1

    Sorry, we couldn't find any results
    Fetching the data, please wait...