Primer
Intergard 242
A general purpose, two component epoxy anti-corrosive primer pigmented with zinc phosphate to comply with BS5493:1977.
BACK TO PRODUCTS
Offshore Oil and Gas
Complete Coating Solutions for Harsh Offshore Environments
- Protect assets from corrosion and extreme conditions.
- Enhance safety with proven fireproofing.
- Minimize maintenance with durable coatings.
Filter by
Products
My Filters
Primer
Intercure 200HS
Intercure 200HS is a fast drying two component, high solids, low VOC, zinc phosphate epoxy primer/intermediate offering excellent barrier protection, low temperature cure and rapid overcoating properties. Complete with MIO, Intercure 200HS can speed up production and throughput in fabrication shops.
Temperature Resistance
Intertherm 751CSA
An innovative, high build, ‘cold spray’ applied coating, Intertherm 751CSA is based on titanium modified inorganic copolymer technology. Capable of providing corrosion protection, Intertherm 751CSA is a high performance coating applied using standard application equipment curing effectively at ambient temperatures. Suitable for steel operating at temperatures between -196°C (-321°F) and 650ºC (1202ºF), Intertherm 751CSA does not require additional heat curing prior to being placed in service.
Passive Fire Protection
Intertherm 7050
Intertherm 7050 is a high performance, durable solvent-free epoxy for use in hot or cold conditions, where long term corrosion protection and thermal insulation are required. Low installed weight and excellent damage and impact resistance make Intertherm 7050 ideal for offsite module fabrication. Duplex systems with Chartek provide both fire and cryogenic spill protection.
Subsea, Abrasion Resistant and Splashzone
Interzone 1000
With proven track record spanning over 30 years, low VOC Interzone 1000 is a high build, two component epoxy coating pigmented with lamellar glass flake. Interzone 1000 extends asset lifetime by providing outstanding abrasion and corrosion resistance to steelwork located in the harshest offshore environments. Interzone 1000 can also be used in deck coating systems with appropriate aggregate.
Primer
Interzinc 2265
Part of the Interzinc 22 series of products.A two component, rapid recoat, fast curing solvent based inorganic zinc rich ethyl silicate primer. Conforms to SSPC Paint 20 Level 3.Available in ASTM D520, Type II zinc dust version as standard
Primer
Interlac 393
A rust inhibitive primer for use over properly prepared steel. A general purpose shop primer, Interlac 393 offers low cost, easy application and low VOC.
Temporary Protection
Interseal 1122
A single component, spray applied, high build, water based coating for direct application over coated substrates and non-ferrous substrates. Interseal 1122 dries to form a non-tacky, tough, resilient temporary protective layer.
Structural Concrete- Repair and Protection
Intercrete 4809 (formerly Fastfil WP)
A single component, water-based (VOC free), polymer modified, fibre reinforced, Portland cement based plugging and sealing compound. When mixed with water, it exhibits unique hydraulic properties to produce a rapid setting mortar which can arrest water seepage and infiltration through joints, cracks or porous areas in concrete and masonry structures.
Finish
Interdur 8860
A two component acrylic polyurethane finish giving excellent durability and long term recoatability.
Chemical Resistant Lining
Ceilcote 242HB Flakeline
Ceilcote 242HB Flakelineis a glass flake filled vinyl ester high build lining for use on steel and concrete substrates.Ceilcote 242HB Flakelinehas excellent resistance to organic and inorganic acid solutions and many aliphatic solvents. The coating system can achieve a dry film thickness of up to 1350 microns (54 mils) in a single coat. The intent is to eliminate one application step where similar coating systems require two separate applications. Ceilcote 242HB Flakeline can be applied on concrete and metal surfaces with proper surface preparation. Uses Ceilcote #2 Hardener.
Structural Concrete- Repair and Protection
Intercrete 4823 (formerly Monolevel RM)
A pre-bagged, single component, water-based (VOC-free), fibre reinforced cementitious mortar which cures rapidly to produce a high performance, waterproof, fair-faced render. It is supplied as a single component system ready for on-site mixing and use, requiring only the addition of clean water. Thixotropic, single component, polymer modified, waterproof one-coat cementitious render.