Lining
Devmat 111
A 100% solids, two-component epoxy novolac tank lining with excellent chemical and solvent resistance. *Please note this product is only available in North America.
BACK TO PRODUCTS
Infrastructure
Solutions for Structural Integrity and Design Excellence
- Ensure safety and durability.
- Enhance impact resistance.
- Maintain design aesthetics for years to come.
Filter by
Products
My Filters
Other
Interbuild 1081
Interbuild 1081 is a pigmented, solvent free, self-smoothing, Epoxy overlay system designed to provide seamless protection of Concrete substrates from 2mm to 5mm. Interbuild 1081 will provide a gloss finish with excellent wear characteristics and abrasion resistance, high levels of chemical resistance and an easy to clean smooth finish.
Finish
Devlac 1432
A quick dry, corrosion resistant gloss enamel specially formulated for finishing metal products. *Please note this product is only available in North America.
Other
Interplus 4102 Odin Gel
A single component, water-based rust remover / cleaner gel. Interplus 4102 Odin Gel is 100% biologically degradable, free for toxins and conforms to the yellow classification of the Harmonised Offshore Chemical Notification Format (HOCNF).
Primer-Finish
Interzone 9545
A two component, ultra-low VOC, fast curing, hybrid epoxy technology. As a heavy duty epoxy barrier coating formulated for single leg airless spray application Interzone 9545 is designed to provide long term corrosion protection in aggressive offshore environments. Approved to Norsok M-501 System 7A and 7B Interzone 9545 shows excellent corrosion resistance to abrasion and cathodic disbondment.
Primer-Finish
Bar-Rust 231
A low VOC, two component high build, high solids surface tolerant epoxy maintenance coating.
Primer-Finish
Tru-Glaze 4508H
A high performance, versatile, two component, chemically cured tile-like epoxy coating with excellent chemical, corrosion, moisture, stain, and abrasion resistance.
Primer-Finish
Devcryl 1440
A low VOC, single component, rust inhibitive water borne acrylic for use as a primer or finish applied directly to properly prepared metal, concrete or wood surfaces. *Please note this product is only available in North America.
Finish
Devthane 389H
A high performance, low VOC, two-component chemically-cured aliphatic urethane gloss finish. *Please note this product is only available in North America.
Finish
Devlac 1433
A quick drying, high gloss alkyd enamel available in a wide range of colours. *Please note this product is only available in North America.
Primer-Finish
Intergard 3500
Designed for use in the rail industry as a one coat direct-to-metal exterior finish or a primer for approved topcoats; Intergard 3500 has excellent edge retentive properties and provides a combination of anti-corrosive barrier protection and abrasion, chemical fume and spillage resistance. Intergard 3500 is formulated with ultra high solids, providing an option where regulations or customer preference require low VOCs and zero HAPs coatings
Other
RELEST Wind Leading Edge Cartridge
RELEST Wind LEP Cartridge is a two-component solvent-free polyurethane coating which is especially designed for protecting the leading edge of rotor blades of wind energy plants from erosion damage caused by rain, sand, hail, dirt and other particles suspended in the air. The coating consists of an exceptionally fast, hard wearing, UV- and abrasion resistant polyurethane elastomer. It is supplied in a convenient 2-component cartridge for direct application of minimal quantities without weighing.
Primer
Devprime 1403
A heavy duty, high quality, rust inhibitive alkyd primer for use over properly prepared steel. A high performance shop primer with high volume solids providing increased coverage rates and one coat application. *Please note this product is only available in North America.
Primer-Finish
Devthane 359H
A high performance, low VOC, two-component chemically-cured aliphatic urethane gloss finish. *Please note this product is only available in North America.
Other
RELEST Wind Leading Edge - I374-0735
RELEST Wind LEP is a two-component solvent-free polyurethane coating which is especially designed for protecting the leading edge of rotor blades of wind energy plants from erosion damage caused by rain, sand, hail, dirt and other particles suspended in the air. The coating consists of an exceptionally fast, hard wearing, UV- and abrasion resistant polyurethane elastomer.