Primer
Intershield 300V
A light coloured, abrasion resistant, aluminium pure epoxy coating giving excellent long term anticorrosive protection and low temperature application capability.
BACK TO PRODUCTS
All Products
Filter by
Products
My Filters
Temporary Protection
RELEST Wind LEP ETU Cartridge - I374-8735
RELEST Wind LEP ETU Cartridge I374-8735 Easy To Use is a two-component solvent-free polyurethane coating for the M&R market which is especially designed for protecting the leading edge of rotor blades of wind energy plants from erosion damage caused by rain, sand, hail, dirt and other particles suspended in the air. The coating consists of an exceptionally fast, hard wearing, UV- and abrasion resistant polyurethane elastomer. It is supplied in a convenient 2-component cartridge for direct application of minimal quantities without weighing.
Temperature Resistance
Intertherm 891
A one component, general purpose heat resistant paint, based on air drying oleoresinous resins, and pigmented with aluminium flake.
Primer-Finish
Intergard 452
Intergard 452 is a two component, high build epoxy intermediate. Pigmented with micaceous iron oxide to comply with the requirements of BS5493:1977
Finish
Interbuild 1003
Interbuild 1003 is a high performance, two component epoxy primer with excellent chemical and abrasion resistance properties. Interbuild 1003 is especially suited for mechanically prepared concrete substrates or porous substrates that prone to weakness, due to excellent penetration and high adhesion properties.
Chemical Resistant Lining
Devchem 256
A chemical resistant tank lining and protective coating for highly corrosive environments.
Other
RELEST Wind Gelcoat - I372-7235
RELEST Wind Gelcoat ca. RAL 7035, RA is a solvent free 2k viscoplastic, polyaspartic coating with excellent abrasion resistance. Suitable as part of a coating system for UV- and weather- resistance. Film thicknesses of approximately 200μm can be achieved in one step with optimal flow properties. RELEST Wind Gelcoat ca. RAL 7035, RA is characterised by its great adhesion to epoxy laminate.
Filler
Devfil 145
A two-component epoxy filler and surfacer for interior and exterior concrete and masonry. *Please note this product is only available in North America.
Surface Tolerant
RELEST Wind Putty Porefiller - I372-5915
RELEST Wind Putty Porefiller is a 2K polyurethane for filling medium pinholes. UV- and weather- resistant with very fast drying properties and long workable life. It is compatible with all RELEST coating systems and can be recoated without sanding.
Primer-Finish
Interbuild 1094
Interbuild 1094 is a pigmented, solvent free, self-smoothing, Epoxy overlay system designed to provide seamless protection of Concrete substrates from 0.5mm to 1mm. Interbuild 1094 will provide a gloss finish with excellent wear characteristics and abrasion resistance, high levels of chemical resistance and an easy to clean smooth finish.
Preconstruction Primer
Interplate 855
A two pack, zinc silicate shop (pre-construction) primer providing good corrosion protection even after heating up to 800°C (1472°F) and resistance to damage caused by welding, gas cutting and fairing. Suitable for fast welding processes and offers control of secondary surface preparation requirements.
Passive Fire Protection
Chartek ONE
Chartek ONE is a high performance, boron free, modified epoxy intumescent fire protection solution.
Topcoat
RELEST Wind WB Topcoat LI - I394-x8xx
RELEST Wind WB Topcoat LI is a waterborne 2K acrylic polyurethane topcoat for use as a finishing coat on rotor blades. It is fast drying and allows for rapid recoating even at high film thicknesses without the risk of blistering. RELEST Wind WB Topcoat LI offers excellent UV and weathering resistance.