BACK TO PRODUCTS

Onshore Oil and Gas

Reliable Coating Solutions for Long-Lasting Performance
  • Extend service life with durable coatings.
  • Reduce unplanned shutdowns with corrosion protection.
  • Optimize efficiency in tough onshore environments.
     

EXPLORE CASE STUDIES

CASES

Durable Protection for a Landmark LNG Project

Filter by

Products

355 Product Found
My Filters
    Passive Fire Protection
    Interkote 1460
    Formulated with bauxite, Interkote 1460 provides cost-effective resistance for up to four hours hydrocarbon pool fire in accordance with UL 1709. Interkote 1460 is ideally suited for onshore facilities where onsite application of cement-based PFP is preferred.
    Lining
    Enviroline 375
    Enviroline 375 is a high solids, fast curing advanced hybrid epoxy novolac and can be applied as a one or two coat system to provide a wide range of chemical resistance.
    Lining
    Interline 1064
    Other
    Enviroline 376F-60 MR System
    Enviroline 376F-60 MR is a reinforced chemcial resistant system. The system features a 100% volume high solids, two component polycyclamine cured lining topcoat. Fibre glass mat reinforcement increases physical properties and where necessary allows dynamic crack bridging in concrete.In the table below you can find System Sheet and Application guidelines. For Technical Datasheets and MSDSs please click on the links to the individual component products of the system below the table.
    Primer
    Enviroline 58UHS
    Enviroline 58UHS is an ultra high solids, low viscosity, <100g/l VOC compliant rust inhibitive epoxy primer.
    Structural Concrete- Repair and Protection
    Intercrete 4879 (formerly Cemprotec MCI 2020)
    A clear, water-based, organic surface treatment for existing concrete structures. Based on time proven, corrosion inhibiting technology, it has been specially formulated to migrate into concrete, by liquid and vapour diffusion, to form a protective monomolecular layer on steel reinforcement, which helps to reduce corrosion.
    The penetrative action of Intercrete 4879 ensures that it does not inhibit the free passage of water vapour and it has a minimal effect on surface appearance. It is most effective when used in conjunction with the Flexcrete Concrete Repair and Protection System in protecting steel in aggressive environments subject to high levels of chlorides, such as marine and highway structures. With corrosion inhibiting technology which was developed over 20 years ago, it has a proven track record of protecting and enhancing the durability of structures worldwide.
    Primer
    Ceilcote 680M
    Ceilcote 680M Primer/Saturant is a low viscosity, 85% volume solids epoxy compound based on a unique adduct curing technology. This provides tolerance of surface moisture at temperatures down to 2ºC (32ºF) and the ability to cure in the presence of moisture. The addition of Ceilcote C#1 Powder provides conductivity where required.
    Other
    Ceilcote 242AR MR Flakeline System
    Ceilcote 242AR MR Flakeline is a reinforced chemical resistant system. The system features an abrasion resistant vinyl ester topcoat for long-term chemical and abrasion resistance. Fibre glass mat reinforcement to increase physical properties and where necessary bridge dynamic cracks in concrete.
    In the table below you can find System Sheet and Application guidelines. For Technical Datasheets and MSDSs please click on the links to the individual component products of the system below the table.
    Temperature Resistance
    Interbond 1202UPC
    Interbond 1202UPC is a universal pipe coating that provides external protection for above ground piping and accessories operating between -196ºC (-321ºF) and 650ºC (1202ºF). Interbond 1202UPC reduces coating complexity and overall project painting costs by standardizing coating specifications, providing excellent corrosion protection in a wide range of operating environments including corrosion under insulation (CUI) conditions. Based on an inorganic copolymer resin system, Interbond 1202UPC is compliant with the performance criteria of the ISO12944-9 cyclic aging test, without a primer.
    Temperature Resistance
    Intertherm 3070
    Designed specifically for the subsea market, Intertherm 3070 is a two component phenolic epoxy novolac with excellent high temperature resistance and compatibility with cathodic protection.
    Lining
    Interline 850
    A versatile thin film epoxy phenolic tank lining with an extended overcoating interval of up to 30 days, Interline 850 expands your options when scheduling maintenance. It can be used direct to metal, as both holding primer and build coat in a system, and with tanks returning to service in as little as five days, Interline 850 can further improve schedule.
    Lining
    Interline 399
    A high performance, highly crosslinked two component epoxy novolac tank lining, with excellent heat and solvent resistance.
    Finish
    Interdur 8860HS
    A two component, high solids acrylic polyurethane finish giving excellent durability and long term recoatability.
    Primer
    Intershield 4000USP
    Intershield 4000USP is designed as a zinc free high performance primer that provides very high durability performance in aggressive environments when used as part of a 3 coat system.
    Finish
    Interthane 990E
    Interthane® 990E is the latest aliphatic acrylic polyurethane finish from AkzoNobel and builds on the trusted globally renowned performance properties of Interthane 990.
    1. 1

    Sorry, we couldn't find any results
    Fetching the data, please wait...