BACK TO PRODUCTS

All Products

Filter by

Products

505 Product Found
My Filters
    Temporary Protection
    Interseal 1122
    A single component, spray applied, high build, water based coating for direct application over coated substrates and non-ferrous substrates. Interseal 1122 dries to form a non-tacky, tough, resilient temporary protective layer.
    Structural Concrete- Repair and Protection
    Intercrete 4809 (formerly Fastfil WP)
    A single component, water-based (VOC free), polymer modified, fibre reinforced, Portland cement based plugging and sealing compound. When mixed with water, it exhibits unique hydraulic properties to produce a rapid setting mortar which can arrest water seepage and infiltration through joints, cracks or porous areas in concrete and masonry structures.
    Finish
    Interdur 8860
    A two component acrylic polyurethane finish giving excellent durability and long term recoatability.
    Intermediate
    Intergard 263
    A two pack, tar free, modified epoxy tie coat.
    Lining
    Interline 910
    A two component, solvent free chemically resistant heavy duty epoxy tank lining.
    Structural Concrete- Repair and Protection
    Intercrete 4808 (formerly Unimatch)
    A single component, water-based (VOC free), cosmetic grade, polymer modified cementitious mortar suitable for the repair of damaged, honeycombed or spalled concrete. Intercrete 4808 is highly waterproof and exhibits good build characteristics which can be used in vertical, overhead and other difficult areas of repair without the need for primers or supports. Colour and texture matching is easily achieved by mixing Grey and White grades at different ratios using trial mixes. Coloured aggregates and concrete pigments can also be blended in.
    Chemical Resistant Lining
    Ceilcote 242HB Flakeline
    Ceilcote 242HB Flakelineis a glass flake filled vinyl ester high build lining for use on steel and concrete substrates.Ceilcote 242HB Flakelinehas excellent resistance to organic and inorganic acid solutions and many aliphatic solvents. The coating system can achieve a dry film thickness of up to 1350 microns (54 mils) in a single coat. The intent is to eliminate one application step where similar coating systems require two separate applications. Ceilcote 242HB Flakeline can be applied on concrete and metal surfaces with proper surface preparation. Uses Ceilcote #2 Hardener.
    Chemical Resistant Lining
    Ceilcote 6650 Ceilcrete
    Ceilcote 6650 Ceilcrete is a trowel-applied novolac vinyl ester system designed specifically for the protection of steel and concrete against corrosive chemicals. The system includes a synthetic or fibreglass reinforcing layer.Ceilcote 6650 Ceilcrete exhibits excellent resistance to a wide range of solvents, chlorinated aromatics and aliphatics. Uses Ceilcote #2 Hardener.
    Temperature Resistance
    Intertherm 838
    Supplied as a single component, fibre reinforced, high build cement based repair mortar.Requires the addition of clean water at site. *Selective Countries Only - Please contact your local representative.
    Surface Tolerant
    Interplus 880
    A low VOC, two component high solids flexible aliphatic surface tolerant polyurethane primer, intermediate or finish capable of producing high build films.
    Primer-Finish
    Interthane 1014
    Finish
    Interlac 648
    A single component, speciality fluorescent alkyd coating specifically formulated to provide maximum visibility.
    Finish
    Interthane 1024
    A two component, fast drying, acrylic polyurethane finish giving excellent durability and long term recoatability.
    Subsea, Abrasion Resistant and Splashzone
    Interzone 954GF
    A high solids, low VOC epoxy barrier coat, reinforced with chemically resistant high aspect ratio lamellar glass flake for enhanced durability, abrasion and corrosion protection with excellent cathodic disbondment performance.
    Structural Concrete- Repair and Protection
    Intercrete 4823 (formerly Monolevel RM)
    A pre-bagged, single component, water-based (VOC-free), fibre reinforced cementitious mortar which cures rapidly to produce a high performance, waterproof, fair-faced render. It is supplied as a single component system ready for on-site mixing and use, requiring only the addition of clean water. Thixotropic, single component, polymer modified, waterproof one-coat cementitious render.
    1. 1

    Sorry, we couldn't find any results
    Fetching the data, please wait...