BACK TO PRODUCTS

All Products

Filter by

Products

47 Product Found
My Filters
    Structural Concrete- Repair and Protection
    Intercrete 4840 (formerly Cemprotec E942)
    A two component, epoxy and polymer modified cementitious coating for the protection of concrete and steel substrates. *Selective Countries Only - Please contact your local representative.
    Structural Concrete- Repair and Protection
    Intercrete 4875 (formerly Cemprotec Scrim)
    A flexible latex, open weave textured glass scrim for reinforcing cementitious coatings over welds or on edges. Excellent resistance to alkaline environments.
    Structural Concrete- Repair and Protection
    Intercrete 4813 (formerly Metal-Prime WB)
    A single component, water-based (VOC free), epoxy and acrylic-based anti-corrosion primer. Intercrete 4813 is a phosphate free formulation which forms a distinctive oxide red film upon application, ensuring even coverage of the substrate.
    Extremely effective at preventing flash rusting and rust creep around holidays or areas of damage.
    Other
    Intercrete 4872 (formerly Cemprotec 200-S)
    An advanced, permanently elastomeric, highly tear-resistant, breathable, waterproof sealing tape.
    Structural Concrete- Repair and Protection
    Intercrete 4873 (formerly Cemprotec GE080)
    A thermally bonded, non-woven geotextile based on 100% polypropylene polymers.
    Structural Concrete- Repair and Protection
    Intercrete 4806 (formerly Monopour)
    A single component, water-based (VOC free), high performance, polymer modified, non-shrink cementitious formulation. Intercrete 4806 is a micro-concrete with a maximum aggregate size of 6mm for larger depths up to 200mm
    Structural Concrete- Repair and Protection
    Intercrete 4890 (formerly Monodex Ultra Series 2)
    Intercrete 4890 is a single pack, low VOC, water-based, modified styrene acrylic copolymer decorative concrete coating that provides excellent protection against carbonation and water ingress without entrapping moisture within damp substrates. Elastomeric properties enable the system to accommodate hairline cracks and substrate movement while providing lasting protection. Adhesion is excellent to mineral substrates.
    Structural Concrete- Repair and Protection
    Intercrete 4871 (formerly Steel Reinforcement Protector 841)
    A two component, water based, polymer modified cementitious anti-corrosive coating. *Selective Countries Only - Please contact your local representative.
    Structural Concrete- Repair and Protection
    Intercrete 4809 (formerly Fastfil WP)
    A single component, water-based (VOC free), polymer modified, fibre reinforced, Portland cement based plugging and sealing compound. When mixed with water, it exhibits unique hydraulic properties to produce a rapid setting mortar which can arrest water seepage and infiltration through joints, cracks or porous areas in concrete and masonry structures.
    Structural Concrete- Repair and Protection
    Intercrete 4808 (formerly Unimatch)
    A single component, water-based (VOC free), cosmetic grade, polymer modified cementitious mortar suitable for the repair of damaged, honeycombed or spalled concrete. Intercrete 4808 is highly waterproof and exhibits good build characteristics which can be used in vertical, overhead and other difficult areas of repair without the need for primers or supports. Colour and texture matching is easily achieved by mixing Grey and White grades at different ratios using trial mixes. Coloured aggregates and concrete pigments can also be blended in.
    Structural Concrete- Repair and Protection
    Intercrete 4823 (formerly Monolevel RM)
    A pre-bagged, single component, water-based (VOC-free), fibre reinforced cementitious mortar which cures rapidly to produce a high performance, waterproof, fair-faced render. It is supplied as a single component system ready for on-site mixing and use, requiring only the addition of clean water. Thixotropic, single component, polymer modified, waterproof one-coat cementitious render.
    Structural Concrete- Repair and Protection
    Intercrete 4879 (formerly Cemprotec MCI 2020)
    A clear, water-based, organic surface treatment for existing concrete structures. Based on time proven, corrosion inhibiting technology, it has been specially formulated to migrate into concrete, by liquid and vapour diffusion, to form a protective monomolecular layer on steel reinforcement, which helps to reduce corrosion.
    The penetrative action of Intercrete 4879 ensures that it does not inhibit the free passage of water vapour and it has a minimal effect on surface appearance. It is most effective when used in conjunction with the Flexcrete Concrete Repair and Protection System in protecting steel in aggressive environments subject to high levels of chlorides, such as marine and highway structures. With corrosion inhibiting technology which was developed over 20 years ago, it has a proven track record of protecting and enhancing the durability of structures worldwide.
    Structural Concrete- Repair and Protection
    Intercrete 4851 (formerly Cemprotec E-Floor)
    A two component, fast drying, water based epoxy and polymer modified cementitious flooring for the protection of concrete substrates.Intercrete 4851 exhibits both excellent flow characteristics and ease of application by pouring or pumping techniques to give a smooth surface finish. *Selective Countries Only - Please contact your local representative.
    Structural Concrete- Repair and Protection
    Intercrete 4880 (formerly Biodex HB Series 2)
    A single component, water-based (VOC-free), elastomeric, high build hygiene coating for walls and ceilings in demanding service conditions. Intercrete 4880 is a resin-rich biostatic membrane that incorporates the latest encapsulated protectant technology in combination with silver ions to give completely safe use and zero leaching into the surrounding environment. It effectively prevents the growth of mould and bacteria whilst proven silver ion technology has recognised benefits in limiting the spread of germs. The unique in-film chemistry allows for the ultra-slow, controlled release of active ingredients into the coating film throughout a long service life, even where harsh cleaning regimes are followed.
    Structural Concrete- Repair and Protection
    Intercrete 4803 (formerly Monolite)
    A single component, water-based (VOC free), polymer modified, fibre reinforced, low density cementitious repair mortar. The thixotropic nature of the product enables easy high build hand and trowel application for the repair of voids and the rendering and re-profiling of vertical, horizontal and overhead surfaces.
    1. 1

    Sorry, we couldn't find any results
    Fetching the data, please wait...