BACK TO PRODUCTS

Thermal Power

Product Applications

We offer a wide range of high performance coatings that provide long term corrosion protection and aesthetics

CASES

Optimized Capacity with Interline 984

Filter by

Products

268 Product Found
My Filters
    Other
    Ceilcote 6650AR Ceilcrete System
    Ceilcote 6650AR Ceilcrete is a trowel-applied abrasion resistant novolac vinyl ester system designed specifically for the protection of steel and concrete against corrosive chemicals and abrasion. The system includes a fibreglass reinforcing layer.In the table below you can find System Sheet and Application guidelines. For Technical Datasheets and MSDSs please click on the links to the individual component products of the system below the table.
    Other
    Enviroline 405HTR MR System
    Enviroline 405HTR MR is a reinforced chemcial resistant system. The system features a high temperature reesistant, 100% volume high solids, two component polycyclamine cured lining topcoat. Fibre glass mat reinforcement increases physical properties and where necessary allows dynamic crack bridging in concrete.In the table below you can find System Sheet and Application guidelines. For Technical Datasheets and MSDSs please click on the links to the individual component products of the system below the table.
    Primer-Finish
    Intercure 3240G
    A two component, gloss, low VOC, high solids, fast drying polyaspartic primer/finish coating. Intercure 3240G provides improved productivity at ambient temperature application whilst combining the anti-corrosive performance of epoxy coatings and high aesthetics of UV durable topcoats in a single coat application. Intercure 3240G is applied as a single coat direct to correctly prepared substrates using manual mix (single leg) or automatic mix (plural leg) application equipment, reducing application time, energy consumption and labour costs when compared to two coat applications, or single coat applications which require force drying at high temperature.
    Structural Concrete- Repair and Protection
    Intercrete 4811 (formerly Bond-Prime)
    A single component, water-based (VOC free), rapid curing, acrylic copolymer modified with a unique water-emulsified epoxy cross-linking agent. Intercrete 4811 is inherently hydrophobic and alkali resistant, making it ideal for application to a wide range of new and aged mineral substrates.
    It is non-hazardous, and application is by brush, roller or airless spray to prime and stabilise surfaces prior to the application of Flexcrete’s specialist membranes. Intercrete 4811 cures to form a clear film with an identifying green tint, both on and within the substrate, to provide an ideal surface for subsequent treatment.
    Structural Concrete- Repair and Protection
    Intercrete 4801 (formerly Monomix HD)
    Supplied as a single component, fibre reinforced, high build cement based repair mortar.Requires the addition of clean water at site. *Selective Countries Only - Please contact your local representative.
    Lining
    Interline 859
    A two component, chemically resistant, high solids, high build epoxy phenolic tank lining providing static dissipation properties.
    Structural Concrete- Repair and Protection
    Intercrete 4895 (formerly Monodex ICB)
    A single component, low VOC, elastomeric, intermediate, water-based crack-bridging filler and coating which is designed for use where enhanced crack-bridging properties are required. It is capable of bridging existing cracks up to 1mm and also acts as a filler for pores, cavities and blowholes.
    Supplied as a ready-mixed paste for ease of use, it is highly cost-effective and can be applied straight onto the substrate as no primers are required
    Surface Tolerant
    Interbond 998PB
    A solvent free, two component, high build, surface tolerant epoxy coating capable of being applied as a single or multi-coat system over abrasive blasted, hydroblasted or mechanically prepared steel surfaces.
    Lining
    Enviroline 124
    A solvent free, two component polycyclamine cured girth weld coating system utilising advanced epoxy novolac technology.
    Subsea, Abrasion Resistant and Splashzone
    Interzone 101
    A two component, solvent free epoxy which can be applied underwater and will cure underwater to give a corrosion and abrasion resistant coating.
    Primer
    Intertuf 262
    A low VOC, two component corrosion inhibitive surface tolerant epoxy. Provides surface tolerant application and high build formulation. Can be utilised with an alternate converter for low temperature or fast recoat applications.
    Primer-Finish
    Intergard 345
    Intergard 345 is a versatile, low VOC, high solids, zinc phosphate direct-to-metal epoxy. Suitable for use as a one or two coat new construction primer-finish coating or as an intermediate over recommended anticorrosive primers. Intergard 345 offers excellent anticorrosive performance with rapid drying time and excellent early abrasion resistance resulting in high steel throughput and increased productivity.
    Other
    Ceilcote 800AR Coroline System
    Ceilcote 800AR Coroline is a trowel-applied abrasion resistant epoxy novolac system designed specifically for the protection of steel and concrete against corrosive chemicals and abrasion. The system includes a fibreglass reinforcing layer.In the table below you can find System Sheet and Application guidelines. For Technical Datasheets and MSDSs please click on the links to the individual component products of the system below the table.
    Lining
    Enviroline 376F-60
    A solvent free, two component polycyclamine cured lining system utilising advanced epoxy novolac technology with flake and fibre reinforcement.
    Chemical Resistant Lining
    Ceilcote 505 Coroline
    A heavy duty epoxy system with proven chemical resistance for use over metal or concrete surfaces. Uses Ceilcote #4A Hardener.
    1. 1

    Sorry, we couldn't find any results
    Fetching the data, please wait...