Finish
Devthane 389
A high performance, two-component chemically-cured aliphatic urethane gloss finish. *Please note this product is only available in North America.
BACK TO PRODUCTS
Onshore Oil and Gas
Reliable Coating Solutions for Long-Lasting Performance
- Extend service life with durable coatings.
- Reduce unplanned shutdowns with corrosion protection.
- Optimize efficiency in tough onshore environments.
Filter by
Products
My Filters
Surface Tolerant
Bar-Rust 235V
An ultra low VOC, high performance, multi-purpose, surface tolerant, two-component chemically-cured epoxy semi-gloss coating.
Primer
Devran 203
A high performance, chemically cured, rust inhibitive water borne epoxy primer for interior or exterior steel, galvanized metal or aluminium surfaces. *Please note this product is only available in North America.
Grout
Ceilcote 748 Corrosion Grout
CEILCOTE 748 Corrosion Grout is a three-component chemicalresistant epoxy grouting material. It provides high strength, good adhesion to concrete and steel, minimal shrinkage and resists degradation by corrosive chemicals.
Primer
Interdur 8805
A two component, rapid recoat, fast curing solvent based inorganic zinc rich ethyl silicate primer. Conforms to SSPC Paint 20 Level 3. Available in ASTM D520, Type II zinc dust version as standard.
Finish
Devthane 379
A high performance, two-component chemically-cured aliphatic urethane gloss finish. *Please note this product is only available in North America.
Structural Concrete- Repair and Protection
Intercrete 4804 (formerly Marine Mortar S)
A two component, water-based (VOC-free), fibre reinforced, polymer modified, cementitious mortar with excellent adhesion for use in areas subject to early immersion. Intercrete 4804 cures rapidly to produce a high strength mortar with enhanced polymeric properties for the repair of voids in aggressive marine environments. Suitable for thicknesses up to 50mm.
Reference
Ceilcote 610 Ceilpatch
Ceilcote 610 Ceilpatch is a chemical-resistant epoxy patching/filling compound that is used to fill defects in concrete or steel surfaces prior to the application of Ceilcote lining, coating or flooring systems. It provides excellent adhesion to concrete or steel, minimal shrinkage and superior chemical resistance.
Primer
Intergard 436
A two component clear epoxy sealer.Can be applied to slightly damp concrete. Cures quickly, long pot life. Excellent resistance to most alkalis, solvents, mild acids and water. Good toughness and resilience. Excellent binding properties to weathered fibrous cement sheeting.
Temperature Resistance
Intertherm 50
A single component, high temperature coating based on a moisture-curing silicone binder, Intertherm 50 is ideal for the protection of steel from corrosion at temperatures up to 540°C (1004°F). The moisture-curing crosslinking technology of Intertherm 50 allows multiple coats to be applied without heat curing.
Intermediate
Intergard 475HS
Intergard 475HS is a low VOC, high solids, high build epoxy used to improve barrier protection for a range of anticorrosive coating systems in a wide range of aggressive environments. Intergard 475HS can be pigmented with MIO to provide improved overcoating properties, better facilitating application in the fabrication shop.