BACK TO PRODUCTS

Onshore Oil and Gas

Reliable Coating Solutions for Long-Lasting Performance
  • Extend service life with durable coatings.
  • Reduce unplanned shutdowns with corrosion protection.
  • Optimize efficiency in tough onshore environments.
     

EXPLORE CASE STUDIES

CASES

Durable Protection for a Landmark LNG Project

Filter by

Products

355 Product Found
My Filters
    Lining
    Interline 955
    A two component, heavy duty vinyl ester coating reinforced with glass flake to increase chemical and abrasion resistance.A chemically resistant, vinyl ester coating which can be applied using standard airless spray equipment at material temperatures up to 35°C (95°F).
    Structural Concrete- Repair and Protection
    Intercrete 4893 (formerly Monodex Clear)
    A single component, low VOC, transparent coating that offers an excellent defence against carbon dioxide ingress and the effects of weathering, significantly prolonging the maintenance free life of buildings and structures. Applied without a primer, it forms a clear, satin finish that retains the original appearance of the concrete substrate to which it is applied. It prevents water ingress, yet allows damp substrates to breathe and dry out, and is both dirt and UV resistant. Long term protection from the growth of mould and fungi is assured with the use of advanced encapsulated biocide technology to help maintain its original appearance.
    Primer
    Intergard 2511
    A two component, low VOC, high solids, epoxy primer containing zinc phosphate anti-corrosive pigmentation.This primer's versatile application properties provide robust film thickness control as supplied, without the need to thin.
    Chemical Resistant Lining
    Ceilcote 140 Flakeline
    Ceilcote 140 Flakeline is a heavy duty, glass flake reinforced, chemically resistant vinyl ester lining for protection of steel against aggressive chemicals in immersion service. Uses Ceilcote #2 Hardener.
    Reference
    Ceilcote 165 Grout
    Ceilcote 165 Grout is a carefully blended, three component vinylester grout. It is designed for grouting pumps, vessels and equipment that are subjected to chemical exposure.
    Temperature Resistance
    Intertherm 228HS
    A highly crosslinked, two component, high build epoxy phenolic coating, Intertherm 228HS combines properties of corrosion and chemical resistance when used in high temperature service. Based upon novolac resin technology, Intertherm 228HS can be used in a wide range of highly corrosive environments operating at temperatures up to 230°C (446°F).
    Intermediate
    Interdur 8842
    A two component, high solids, low VOC epoxy micaceous iron oxide coating formulated on proprietary polymer technology which provides rapid cure and overcoating even under low temperature conditions.
    Structural Concrete- Repair and Protection
    Intercrete 4874 (formerly Cemprotec 2000-BJT)
    A high performance butyl tape which is designed to join two pieces of Intercrete 4872 waterproof composite tape together. Embedded into our Intercrete range of cementitious coatings, it forms an elastomeric joint between two lengths of tape to accommodate movement.
    Other
    Ceilcote 6650AR Ceilcrete System
    Ceilcote 6650AR Ceilcrete is a trowel-applied abrasion resistant novolac vinyl ester system designed specifically for the protection of steel and concrete against corrosive chemicals and abrasion. The system includes a fibreglass reinforcing layer.In the table below you can find System Sheet and Application guidelines. For Technical Datasheets and MSDSs please click on the links to the individual component products of the system below the table.
    Other
    Enviroline 405HTR MR System
    Enviroline 405HTR MR is a reinforced chemcial resistant system. The system features a high temperature reesistant, 100% volume high solids, two component polycyclamine cured lining topcoat. Fibre glass mat reinforcement increases physical properties and where necessary allows dynamic crack bridging in concrete.In the table below you can find System Sheet and Application guidelines. For Technical Datasheets and MSDSs please click on the links to the individual component products of the system below the table.
    Primer-Finish
    Intercure 3240G
    A two component, gloss, low VOC, high solids, fast drying polyaspartic primer/finish coating. Intercure 3240G provides improved productivity at ambient temperature application whilst combining the anti-corrosive performance of epoxy coatings and high aesthetics of UV durable topcoats in a single coat application. Intercure 3240G is applied as a single coat direct to correctly prepared substrates using manual mix (single leg) or automatic mix (plural leg) application equipment, reducing application time, energy consumption and labour costs when compared to two coat applications, or single coat applications which require force drying at high temperature.
    Structural Concrete- Repair and Protection
    Intercrete 4811 (formerly Bond-Prime)
    A single component, water-based (VOC free), rapid curing, acrylic copolymer modified with a unique water-emulsified epoxy cross-linking agent. Intercrete 4811 is inherently hydrophobic and alkali resistant, making it ideal for application to a wide range of new and aged mineral substrates.
    It is non-hazardous, and application is by brush, roller or airless spray to prime and stabilise surfaces prior to the application of Flexcrete’s specialist membranes. Intercrete 4811 cures to form a clear film with an identifying green tint, both on and within the substrate, to provide an ideal surface for subsequent treatment.
    Structural Concrete- Repair and Protection
    Intercrete 4801 (formerly Monomix HD)
    Supplied as a single component, fibre reinforced, high build cement based repair mortar.Requires the addition of clean water at site. *Selective Countries Only - Please contact your local representative.
    Lining
    Interline 859
    A two component, chemically resistant, high solids, high build epoxy phenolic tank lining providing static dissipation properties.
    Structural Concrete- Repair and Protection
    Intercrete 4895 (formerly Monodex ICB)
    A single component, low VOC, elastomeric, intermediate, water-based crack-bridging filler and coating which is designed for use where enhanced crack-bridging properties are required. It is capable of bridging existing cracks up to 1mm and also acts as a filler for pores, cavities and blowholes.
    Supplied as a ready-mixed paste for ease of use, it is highly cost-effective and can be applied straight onto the substrate as no primers are required
    1. 1

    Sorry, we couldn't find any results
    Fetching the data, please wait...