BACK TO PRODUCTS

Transportation and Pipeline

Product Applications

Effective corrosion protection against some of the most aggressive chemicals, maximizing in-service time and profitability

CASES

Optimized Capacity with Interline 984

Filter by

Products

241 Product Found
My Filters
    Finish
    Interthane 990UHS
    A low VOC, two component acrylic polyurethane high performance finish coat with excellent gloss and colour retention on exterior exposure, for use over correctly prepared primed surfaces.International Paint also offers Interthane 990UHS in a mildew resistant, bright white finish. Contact your International Paint representative for additional information.
    Primer
    Ceilcote 680 Primer
    Ceilcote 680 Primer is a low viscosity epoxy primer for steel and concrete, with low temperature cure and a degree of tolerance to surface moisture.
    Primer
    Interzinc 42
    Interzinc 42 is a high quality general purpose two component epoxy zinc primer designed for use in maintenance and new construction. Containing 50% zinc, Interzinc 42 is recommended as part of an anticorrosive coating system for structures in a wide range of industries
    Finish
    Interfine 878
    Interfine 878 is a high performance, two component, isocyanate-free polysiloxane finish offering superior gloss and colour retention, maintaining aesthetics to highest standards. A tough and hard wearing finish, Interfine 878 exhibits good flexibility and abrasion resistance, suitable for both factory new construction and site maintenance application.
    Primer-Finish
    Interseal 738
    A two component, low VOC, high solids epoxy, pigmented with aluminium to provide enhanced corrosion resistance.
    Lining
    Ceilcote 282HB Flakeline
    Ceilcote 282HB Flakeline has excellent resistance to hot flue gas environments. The coating system can achieve a dry film thickness of up to 1350 microns (54 mils) in a single coat with or without the use of a primer. The intent is to eliminate one applic ation step where similar coating systems require two seperate applications. Ceilcote 282HB Flakeline is normally applied on metal surfaces with proper surface preparation. Uses Ceilcote #2 Hardener.
    Passive Fire Protection
    Interchar 2060
    Interchar 2060 provides 60 minutes fire protection via single coat application while maintaining architectural aesthetics. It is a class leading single component, low VOC intumescent coating suitable for onsite and offsite application. Tested and certified to the highest standards, Interchar 2060 offers rapid drying times for fast handling and throughput.
    Structural Concrete- Repair and Protection
    Intercrete 4810 (formerly Polymer Admixture 850)
    A single component, water-based (VOC free), advanced copolymer dispersion which, when used as an admixture for sand and cement mixes, produces a high strength waterproof patching mortar, screed or render. It can also be mixed with cement to produce a slurry for sealing porous and absorbent substrates.
    Structural Concrete- Repair and Protection
    Intercrete 4854 (formerly Cemprotec EF Grit)
    A quartz aggregate for abrasion and skid resistance for use within INTERCRETE-Floor systems
    Primer
    Interdur 8803
    A high performance, two component, reinforced zinc-rich primer. CHINA ONLY
    Structural Concrete- Repair and Protection
    Intercrete 4853 (formerly Cemprotec Levelling Coat)
    A two component epoxy and polymer modified cementitious coating / wearing screed for levelling and waterproofing concrete substrates. It incorporates advanced cement chemistry, metakaolin, fibre, epoxy and styrene acrylic copolymer technology to give enhanced performance and excellent adhesion to concrete surfaces. When mixed, it exhibits a degree of flow to enable ease of application by pouring or pumping techniques to give an even finish. It hydrates to form a dense screed, which exhibits both polymeric and resinous properties giving low permeability to water and ensuring long term performance. It is specially formulated to harden rapidly to form a durable surface, which can typically be overcoated within 24 hours.
    Primer-Finish
    Interlac 789
    A single component, rapid drying modified alkyd primer/finish, designed to provide both anti-corrosive properties and a decorative finish in a single coat.
    Finish
    Interlac 1017
    A single component alkyd gloss enamel finish.
    Temperature Resistance
    Intertherm 875
    A single component, temperature resistant finish coating, Intertherm 875 is based on silicone and acrylic resins with thermally stable pigmentation. Intertherm 875 does not require heating between coats and it is suitable for steelwork operating at temperatures up to 260°C (500°F) in a wide range of industrial environments.
    Primer
    Interdur 8808
    A two component, metallic zinc rich epoxy primer which complies with the composition and performance requirements of SSPC Paint 20 and HG/T3668, designed to give fast cure at low temperatures. CHINA ONLY
    1. 1

    Sorry, we couldn't find any results
    Fetching the data, please wait...