BACK TO PRODUCTS

Transportation and Pipeline

Product Applications

Effective corrosion protection against some of the most aggressive chemicals, maximizing in-service time and profitability

CASES

Optimized Capacity with Interline 984

Filter by

Products

241 Product Found
My Filters
    Passive Fire Protection
    Interchar 1160
    Interchar 1160 is a single component waterborne intumescent coating designed for onsite application. With zero VOC, Interchar 1160 offers a more environmentally friendly option for protection of structural steelwork, especially where aesthetics are important. Interchar 1160 is independently tested for up to 60 min fire in internal environments.
    Primer
    Intergard 251
    The fast drying and handling properties of Intergard 251 coupled with extended overcoatability make this an excellent primer for factory application prior to full system application on site. Intergard 251 is a two component anticorrosive zinc phosphate epoxy primer for use in both new construction and industrial maintenance for a wide range of anti-corrosive coatings systems.
    Lining
    Interline 982
    A two component epoxy holding primer.
    Primer
    Intergard 214
    A two component epoxy sealer coat pigmented with aluminium flake.
    Passive Fire Protection
    Chartek 7E
    A self-reinforced epoxy coating, Chartek 7E simplifies application giving the oil and gas industry more choice and greater efficiency than ever before. Chartek 7E offers outstanding pool and jet fire resistance for up to two hours and a significant reduction in installed weight against other PFP products in the market.
    Primer
    Interprime 484
    Interprime 484 is an air drying Zinc Phosphate Primer designed for application to all types of steel surfaces.This primer is characterised by good anti-corrosive properties, easy application and the ability to protect hand cleaned steel.
    Lining
    Enviroline 376F-30
    A solvent free, two component polycyclamine cured lining system utilising advanced epoxy novolac technology.
    Structural Concrete- Repair and Protection
    Intercrete 4807 (formerly Ttiefill)
    A single component, water-based (VOC free), polymer modified, fibre reinforced, Portland cement based repair compound which exhibits unique hydraulic properties to produce a rapid setting curing mortar with enhanced polymer properties.
    Intercrete 4807 is ideally suited for the filling of voids, particularly in new construction, which needs to be rapidly put into service, such as tieholes, grout holes and voids around fixings.
    Primer
    Interzinc 109
    A two component, metallic zinc rich epoxy primer formulated to provide fast drying, rapid handling properties and excellent abrasion resistance.
    Primer
    Interprime 539
    A single component modified polyvinyl butyral, phosphoric acid etch primer free from zinc chromate.
    Finish
    Interthane 990V
    A low VOC, two component modified acrylic polyurethane finish giving excellent durability and long-term recoatability, for use over correctly prepared primed surfaces. This product is also HAPS free and exempt solvent free.International Paint also offers Interthane 990V in a mildew resistant, bright white finish. Contact your International Paint representative for additional information.
    Finish
    Interfine 629
    A two component, isocyanate-free, high durability acrylic topcoat, Interfine 629 is ideal for existing structures and new construction where a high gloss, weather resistant finish is required to maintain aesthetics. Its low temperature cure down to 2°C (36°F) and fast drying properties help to optimize application time, enable fast handling and increase productivity.
    Lining
    Ceilcote 64 Lining
    CEILCOTE 64 Lining is a heavy-duty lining that protects steel and concrete in immersion service from strong chemicals. The lining is formulated from polyester resin, inert fillers, and fiberglass reinforcement. It can withstand solution temperatures to 160°F (71°C) in immersion service.
    Passive Fire Protection
    Interchar 1120
    Interchar 1120 will maintain architectural aesthetics for fire resistance periods up to 120 minutes and it is independently tested for up to three hour fire resistance. Interchar 1120 is a single component, low VOC waterborne intumescent coating designed for onsite application to interior exposed structural steel.
    Finish
    Intercure 4500
    A low VOC, high solids, rapid cure primer/finish, Intercure 4500 offers excellent anticorrosive protection and long term aesthetic durability. Based upon innovative polyaspartic resin technology, Intercure 4500 can be applied as a single coat direct-to-metal or over suitable primers for more corrosive environments using standard application equipment. Its rapid cure characteristics (even at low temperatures) help to further optimize application time and reduce labor costs.
    1. 1

    Sorry, we couldn't find any results
    Fetching the data, please wait...